ZeroFee ToolsCalculate your restoration cost
Fill in the details below. All calculations happen in your browser - nothing is sent anywhere.
Your estimated cost
What affects the cost?
Based on 2026 national averages. Your local prices may differ.
| Factor | Impact |
|---|---|
| Water category (1, 2, or 3) | Higher category = more sanitizing; $3 up to $7.50 per sq ft |
| Affected area | Larger areas cost more overall, but per-sq-ft rate can drop |
| Drywall removal | Adds $800–$1,500 flat for cut-out and replacement |
| Flooring replacement | Adds $4–$8 per sq ft on top of drying costs |
| Emergency / after-hours call | Multiplies the total by ~1.25 |
| Mold growth | Remediation adds $500–$6,000+ depending on spread |
| Time before drying starts | Waiting 24–48 hours can push Category 1 into Category 2 or 3 |
Frequently asked questions
How much does water damage restoration cost per square foot?
Based on 2026 national averages: Category 1 (clean water) runs $3–$4 per sq ft, Category 2 (gray water) $4–$6.50 per sq ft, and Category 3 (black water) $7–$7.50 per sq ft. The average total job costs about $3,860, with a typical range of $1,383–$6,370.
Does homeowners insurance cover water damage?
Sudden and accidental damage - like a burst pipe or a failed appliance hose - is usually covered. Long-term leaks, gradual damage, and floodwater typically are not; flooding usually requires a separate flood insurance policy. Always check your policy and file promptly.
How long does drying take after water damage?
Most rooms take 3–5 days of active drying with industrial dehumidifiers and air movers. Thick materials like hardwood or saturated subfloors can take a week or more. Moisture meters are used to confirm everything is dry before repairs begin.
Can I clean up water damage myself?
Small Category 1 spills (under ~10 sq ft) can often be handled with a wet/dry vacuum and fans. Anything larger, any gray or black water, or water behind walls calls for professionals - hidden moisture leads to mold and structural damage that costs far more later.
How fast does mold grow after water damage?
Mold can start growing on damp surfaces within 24–48 hours. That's why professionals aim to begin extraction and drying the same day. If materials stay wet longer than two days, assume mold remediation will be needed on top of drying costs.
What's the difference between Category 1 and Category 3 water?
Category 1 is clean water from sources like burst supply lines or rainwater - it poses little health risk. Category 3 is grossly contaminated: sewage, floodwater, or water with harmful bacteria and chemicals. Category 3 requires protective equipment, full sanitizing, and removal of porous materials, which is why it costs roughly double per square foot.